Axle Scales
Industrial Portable Axle Scales
SI’s Portable Axle Scale Products allow operators to maximize each load without running the risk of putting overweight vehicles on the road. With Lodec axle scales, the operator can see individual axle weights and total trailer weight as the trailer is loaded.
When loading is completed, the operator will not have to wait in line for a weight reading on a remote scale or move back and forth between load and scale to get maximum legal weights.
Features:
- Material: Aluminum
- Weight: 800 lb. to 1,000 lb.
- Weighbridge Length: 7 Ft.
- Size: L 118.2″ x W 32″ x H 5.5″
- Rated Capacity: 60,000 to 100,000 lb.
- Axle Accommodations: Single/Tandem
- Low Maintenance
- Full electronic
- No moving parts to wear or adjust
- High strength load cell located within the platforms
- Environmentally sealed
- Quick set-up and easy operation
- Special trailers with electric winches for one man operation
- Optional: Your Choice of Indicators offering features from One, Two or Three Channels, Communications RS232 and RS422, Portable Indicators with Single or Multiple Channels, Printing Capabilities and Scoreboard Displays
Industrial Permanent, Semi-Permanent Axle Scales
SI’s Axle Scale Systems Flush Mount box-end model is designed to be installed in a shallow pit. The scales kit contains all prefabricated forms, rebar, galvanized edge, and coping for 7′ to 14′ pit construction. With the addition of ramp-ends, the Axle Scale becomes a Ramp-End scale for surface mount.
With Lodec axle scales, the operator can see individual axle weights and total trailer weight as the trailer is loaded. When loading is completed, the operator will not have to wait in line for a weight reading on a remote scale or move back and forth between loader and scale to get a maximum legal weight.
Features:
- Material: Aluminum & Structural Steel
- Weight: 870 lb. to 3,800 lb. with steel box-ends
- Overall Length: 91.2″ to 175.5″
- Weighbridge Length: 7 ft. to 14 ft.
- Overall Width: 31″
- Height: 5.7″ to 5.8″
- Rated Capacity: 60,000 to 80,000 lb.
- Axle Accommodations: Models for Single, Tandem, Spread and Quad
- Low Maintenance
- One-piece electronic load cells
- Environmentally sealed
- Quick set-up and easy operation
- Optional: Your Choice of Indicators offering features from One, Two or Three Channels, Communications RS232 and RS422, Portable Indicators with Single or Multiple Channels, Printing Capabilities and Scoreboard Displays
Law Enforcement Portable Axle Scales – (also see Road Guardian)
The NTEP approved Low-Profile Portable Axle Scales are a multi-weighbridge system featuring one, two, or three pairs of heavy-duty weighbridges. The portable, multiple weighbridges are coupled via remote linkage to form a number of scale lengths and axle accommodations.
High-strength materials and rugged construction ensure that every scale performs accurately and dependably with little maintenance required. Set-up is quick and easy. The multi-component design gives the operator the flexibility to transport the weighing system in component form or fully assembled, and ready to weigh, Single/Split Channel Systems.
Features:
- Material: Aluminum
- Channels 1-3
- Overall Length: 2.9″ to 176″
- Overall Width: 32″
- Overall Weight: 1180-1670 lb.
- Height: 3.6″
- Capacity: 60,000 to 120,000 lb.
- Single Axle Accommodations: Single, Tandem,
- Split-Weigh Axle Accommodation: Single, Tandem, Triple, and Spread
- Drive on and off low platform height
- Low Maintenance and built to last
- Self-leveling load cells
- Load Cells are thoroughly sealed against moisture, etc.
- Platforms are constructed of lightweight high-strength aluminum alloy or heavy-duty structural steel and stainless steel hardware
- Single channel scales provide axle group weights and gross weight
- Split-Weigh axle scales combined with the L5320 Portable Printing Indicator
- Will record all weights
- NTEP approved CC # 93-038p
Please contact us for application assistance and price quotations.